Matters Needing Attention In Process Design Of Towel Fabrics

The process design includes fabric design and fabric specification design.

The former refers to the fabric pattern change, color matching, etc. the latter refers to the design of the length, amplitude, weight, shrinkage, density and other related items of the fabric.

When designing towel fabrics, the above two aspects should be considered and should not be neglected.

At the same time, the following points should be considered.

1. towel fabrics of different uses have different performance.

Face towels and scarves should be double faced with Terry, which has better water absorbency. The towel should be made on one side or on both sides. The wear-resisting property is strong, and the towels and towels should be warp and weft denser.

High performance; napkins and tea towels should be well insulated.

Therefore, technological design should be reasonably carried out in combination with practical uses.

2., pay attention to the principles of beauty, economy, practicality and the three principles.

We should not only start with the appearance of the towels, but also adopt the density organization to affect the service life of the fabrics. We should not only consider the durability of the towels and increase the thickness of the fabrics unilaterally, which will affect the economic benefits.

We should give full play to the raw material characteristics of towels to achieve the best economic results; avoid the rapid decline of individual indicators in the use of textiles, while other indicators still have great potential.

3. consider the change of the physical and mechanical properties and appearance defects of the towel fabric after processing, so as to design and put forward the corresponding requirements reasonably.

4. combine the appearance effect, style characteristic of towel fabric, choose appropriate

Thickness, Terry height and warp and zonal density.

5. consider the weaving and processing parameters, such as the width of towel, the total number of roots, the number of pages in the heald frame, and the way of processing, so as to give full play to the efficiency of the machinery and equipment.

In order to achieve reasonable and accurate design, test is necessary if necessary.

The design method of the test is the same as that of the normal design, but the requirements for the colored yarns are not strict, and the emphasis should be placed on the difficult points of the towels.

If the terry height of cut pile towel is treated by cut pile, whether it meets the requirement of suede plump, the yield of trial and weft density can be determined according to the difficulty of variety. Generally, it can be woven about 100 pieces, so that the production meets the technological requirements and is suitable for weaving performance.

Therefore, according to the needs, the design of samples, the improvement of design and the innovative design can be tested in accordance with the above methods.